WEISS Weathering and IP Test Chambers
Sunshine, Dust, Water, Gas, IP Test Chambers
Global UV testing systems Weiss type BAM
Systems for the simulation of exposure of plastic material to temperature,
climate, rain or acid rain in conjunction with global radiation in the
spectral range from 290 to 450 nanometres.
Main advantages:
> Complete radiation system in the door (also ballast units)
> Radiation device is switched off when the door is opened
> Vertical fluorescent tubes, cooled by circulating air, tubes are easy to
remove and to clean
> Dimmable ballast units compensate ageing of lamps
> Lamps can be switched on and off via the colour touch panel
Technical specification
> Temperature range -20 ... +80 °C (with radiation -10 ...+80 °C)
> Humidity range 10 ... 95 % r.h. between +10... +80 °C
> Radiation wave length 270 ... 400 nm
> UV-Intensity 10 % based on the area of 900 x 700 mm
> Control system: Controller Board S!MCON/32*-NET with
Color Touch Panel.
More information on this product:
www.wut.com/en/schunk01.c.11583.de/all_wvproductsarticle
Climate Chamber WK with Noxious Gas Device
Type BSB
The basis is the Temperature and Climate Test Chamber WT/WK.
The noxious gas test chamber can be removed and inserted! The system
can be used as climate test chamber without the inner test chamber!
Additional applications are:
> Inner test chamber made of plexiglass or polyvinylidene fluoride (PVDF)
> Dosage pump (PTFE design) or mass flow controller
> Low pressure control in the noxious gas chamber
> Dilution of air containing noxious gas is necessary.
Main advantages:
> Interruption of noxious gas supply in case of erroneous opening of
chamber door
> Powerful and uniform temperature/air conditioning
> High temperature constancies by jacket air temperature conditioning
> Exactly adjustable test parameters and therefore highest reproducibility
> Aerosol-free humidification system provides „natural conditions “
> Easy removal of the inner test chamber
Technical specification:
> Temperature range Acryl +15 ... +45°C (PVDF +15 ... +80°C)
> Humidity range 40 ... 75 % r.h.
> Airflow adjustable between 0,5 and 4 m3/h
> Flow rate noxious gas adjustable between 1 and 250 ml/h
> Control system: Controller Board S!MCON/32*-NET with
Color Touch Panel
More information on this product:
www.wut.com/en/schunk01.c.11622.de/all_wvproductsarticle
Dust Test Chamber Type ST 1000
According to DIN VDE 0470 T1 or EN 60529 for testing of the protection
classes IP 5 X and IP 6 X. The ingression of dust into enclosures is
tested. The systems can be equipped with an underpressure device so
that the dust not only settles on the entire specimen but can also ingress
into the specimen.
 | Main Features:
Picture shows Test Chamber
|
More information on this product:
www.wut.com/en/schunk01.c.11588.de/all_wvproductsarticle
Dust Test Chamber Type ST 2000
According to DIN VDE 0470 T1 or EN 60529 for testing of the protection
classes IP 5 X and IP 6 X. The ingression of dust into enclosures is
tested. The systems can be equipped with an underpressure device so
that the dust not only settles on the entire specimen but can also ingress
into the specimen.
Main Features:
> Waste air exhaust via dust filter
> Abrasion resistance of all components in contact with the dust
> Transparent doors for easy charging, surrounding special gaskets
> Dust collecting section below the test chamber
> Wiper
> Vertical air flow
Technical specification:
> Test space volume 2.000 l
> Test room lighting
> Mobile design
> Ports 50 and 100 mm Ř
Picture shows Test Chamber with options!
More information on this product:
www.wut.com/en/schunk01.c.11592.de/all_wvproductsarticle
Dust Test Chamber
 | For testing functioning and tightness in a particle-intensive dust-laden atmosphere as per DIN VDE 0470 part 1 (EN 60529). In addition to external covering with dust, a vacuum is created within the specimens so that ingression of dust can be.
Technical specification:
More information on this product: |
Dust Test Chamber Type ST 600
Features:
> Dust tests with wind simulation
> Housing made of galvanised sheet steel, lacquered
> Ring duct with integrated test space
> Horizontal air flow with temperature conditioning system
> Air velocity control (speed controllable recirculating air fan)
> Abrasion resistance of all components in contact with the dust
> Large doors for easy loading, with surrounding special gaskets
> Dust measurement and control by means of a dust dosage device
> Dehumidification system (compressed air dryer)
> Operating hour counter
Technical specifications:
> Temperature range +5 °C ... 40 °C
> Specimen weight max. 100 kg
> Air velocity 1,5 / 3 / 5 m/s
> Dust reservoir 20 kg contents
> Dust concentration 2 - 10 g/m3 fine dust
More information on this product:
www.wut.com/en/schunk01.c.11602.de/all_wvproductsarticle
Splash Water Test Chamber Type 200/400
 | According to DIN VDE 0470 T1 or EN
Equipment: |
Features:
> Glass door with wiper
> Pneumatical drive of swivel tube
> Adjustable swivel angle
> Replaceable swivel tubes
> Nozzle fittings can be swivelled and replaced
> Adjustable water volume flow and measuring
> Control of test duration
Picture shows Test Chamber with options!
More information on this product:
www.wut.com/en/schunk01.c.11610.de/all_wvproductsarticle
Splash Water Test Chamber Type SWT 600/800
According to DIN VDE 0470 T1 or EN 60529 for testing to protection
classes IPX3 and IPX4. Ingression of water into enclosures is tested.
In conjunction with a timer, the test cycle can be automated with a
settable test time of 3 sec. to 30 h. Thanks to the integrated circulation
equipment, water consumption can be reduced to a minimum.
Equipment:
IP X1, IP X2 Dripping unit
IP X3, IP X4 Nozzles, Sprinkler
IP X5, IP X6 Jet nozzle
IP X9K High pressure nozzle
Features:
> Glass door with wiper
> Pneumatical drive of swivel tube
> Adjustable swivel angle
> Replaceable swivel tubes
> Nozzle fittings can be swivelled and replaced
> Adjustable water volume flow and measuring
> Control of test duration
Picture shows Test Chamber with options!
More information on this product:
www.wut.com/en/schunk01.c.11613.de/all_wvproductsarticle
View other products: www.wut.com
Weathering
Test Chambers
Product range:
>> Global UV testing systems
Weiss type BAM
>> Solar Simulation Chambers
>> Solar Simulation System
>> Ozone-Test-Chamber
WK111-180/Oz
>> Climate Chamber WK with
Noxious Gas Device
>> Dust Test Chamber
Type ST 1000
>> Dust Test Chamber
Type ST 2000
>> Dust Test Chamber
>> Dust Test Chamber
Type ST 600
>> Splash Water Test Chamber
Type 200/400
>»Splash Water Test Chamber
Type SWT 600/800
Solar Simulation
Chambers
Type SC.../ MH and SC... /
MHG
In combination with the irradiation
unit (metal halide lamp and outdoor
filter), all three models provide a
full-function climate chamber. SC
models are equipped with either MH
(Metal Halide) or MHG (Metal Halide
Global) lamps. Since both optical
systems are very similar, both yield
equally good results with respect to
irradiance and its spatial distribution.
However, the MHG lamp is
recommended for tests requiring an
irradiance of > 1,000 W/m2. One
important difference lies in the
spectral distribution of the radiation
that, at certain wavelengths, does
not exhibit the energy peaks in the
MHG spectrum that are found in the
MH spectrum. These peaks can
produce widely differing results in
samples with a corresponding
sensitivity. Another advantage of the
MHG lamp lies in the ability to vary
output across a specific range as
well in the electronic power
regulation.
Technical specification:
> Test space volume 340, 600,
1000 l
> Temperature range with irradiation
-20 °C bis +100 °C
> Humidity range with irradiation 10
% bis 80 % r.h.
> Irradiation intensity Type MH ca.
1000 W/m2
> Irradiation intensity Type MHG
800 bis 1200 W/m2
More information on this product:
www.wut.com/en/schunk01.c.
11597 .de/all_wvproductsarticle
Solar Simulation System
Type SC 2000 / MH
und SC 2000 / MHG
With its spacious useable chamber
volume of 3,400 liters, this model is
suitable for testing medium-sized
components or for testing even
large-volume finished products or
entire component series.
In combination with the irradiation
unit (metal halide lamp and outdoor
filter), all three models provide a
full-function climate chamber. SC
models are equipped with either MH
(Metal Halide) or MHG (Metal
Halide Global) lamps. Since both
optical systems are very similar,
both yield equally good results with
respect to irradiance and its spatial
distribution. However, the MHG
lamp is recommended for tests
requiring an irradiance of
>1,000 W/m2. One important
difference lies in the spectral
distribution of the radiation that, at
certain wavelengths, does not
exhibit the energy peaks in the
MHG spectrum that are found in the
MH spectrum. These peaks can
produce widely differing results in
samples with a corresponding
sensitivity. Another advantage of
the MHG lamp lies in the ability to
vary output across a specific range
as well in the electronic power
regulation.
Technical specification:
> Test space volume 3400 l
> Temperature range with irradiation
-20 °C bis +100 °C
> Humidity range with irradiation 10
% bis 80 % r. F.
> Irradiation intensity Type MH ca.
1000 W/m2
> Irradiation intensity Type MHG
800 bis 1200 W/m2
More information on this product:
www.wut.com/en/schunk01.c.11608
.de/all_wvproductsarticle
Ozone-Test-Chamber
WK111-180/Oz
High acceptation for Ozone-
Resistance-Tests by rubber-
containing specimen! Embrittlement
by the use of Ozone-admission.
Beginning with fissures, proceeding
destruction of the specimen.
The ozone measuring and control
system continuously takes samples
of gas volume and automatically
corrects (closed control circuit) any
losses/fluctuations of the O3
concentration. The ozone is
produced locally, because of the
very short decay time (ca. 30 min).
Main advantages:
> Powerful and uniform temperature /
climate conditioning
> Ozone Range 25 - 200 pphm
> Easy access to the maintenance
components
Technical specification:
> Temperature range +10 ... +60°C
> Climate range +20 ... +40°C
> Humidity range 30 ... 75 % r.F.
> Control system: Controller Board
M!NCON/32* with Controller
element M!NCONTROL*
More information on this product:
www.wut.com/en/schunk01.c.
11616. de/all_wvproductsarticle
View other products:
www.wut.com
| Web page created by: netpeople.hu |  |
|