RLC meters

QuadTech RLC meters

Meters used for impedance measurements (inductance, capacitance, and
resistance) to characterize the performance of a variety of electrical
components and materials.
>> 7000 Precision LCR Meters (CE Mark)
10 Hz  2 MHz, 0.05% Accuracy, Sweep & Tabular Displays, Floppy Drive,
RS 232, IEEE & Handler
>> 1920 Precision LCR Meter (CE Mark)
20 Hz  1 MHz, 0.1% Accuracy, DCR, USB, RS232, IEEE & Handler,
Virtual Front Panel
>> 1730T Precision LCR Meter (CE Mark)
Turns Ratio & DCR Measurements, 10 Test Frequencies (50 Hz  100 kHz)
0.1% Accuracy, IEEE & Handler
>> 1715 LCR Meter (CE Mark)
11 Measurement Parameters, 4 Test Frequencies (100 Hz - 10 KHz),
0.2% Accuracy, Virtual Front Panel
>> 1910 Inductance Analyzer (CE Mark)
20 Hz  1 MHz, 0.1% Accuracy, DCR, Programmable DC Bias to 1A,
RS 232, IEEE & Handler
>> 1320 DC Bias Current Source
0  20A DC Current, DCR, Compatible with Most LCR Meters,
IEEE & Handler

For more information, see the manufacturer's site:
www.quadtech.com/iproducts/family.asp?id=2

7000 Precision LCR Meters

Why Buy?
The widest possible frequency range (7600 to 2MHz, 7400 to 500kHz)
 The graphical sweep function of Z vs. frequency, voltage or current
 The 3 ˝ disk drive for transfer of test results to PC and data analysis
 A lower cost alternative to the Agilent Model 4284A
Features:
Measures 14 Impedance Parameters (2 simultaneously)
0.05% Basic Measurement Accuracy
289,900 Programmable Frequencies from 10Hz to 2MHz
AC Test Voltage Programmable from 20mV to 5V
DC Bias Voltage, 2V Internal or 0 to 200V External
Fast Measurement Speeds up to 40/Second
Automatic Open/Short Zeroing Eliminates Connection Errors
High Resolution LCD with 7 Digit Display
14 Hi/Lo Sorting Bins for Pass/Fail Testing
RS-232, IEEE-488, Printer, and PLC Interfaces all Standard
Results Displayed as Deviation or %Deviation from a Nominal Value
Internal Storage and Recall of Test Setups
Constant Voltage Maintained to the Device Under Test
Ability to Automatically Perform 6 Unique Tests in Sequence
Keypad Lockout Prevents Changes to the Test Setup
On site calibration with NIST Traceable Cal Kit
Programmable Average and Delay Times
     
For more information, see the manufacturer's site:
www.quadtech.com/iproducts/products.asp?familyid=15

1920 Precision LCR Meter

Why Buy?
For a wide test frequency range (to 1MHz) at an affordable price
When both AC impedance and DC resistance measurements are needed
For automated production testing using RS232, IEEE-488 & PLC interfaces
When internal bias voltage is required for testing capacitors
Configure instrument and log results to PC using 1900 Virtual Front Panel
Features:
Measures 15 Impedance Parameters, DC Resistance, Voltage and
Current
0.1% Basic Measurement Accuracy
27,000 Programmable Frequencies from 20Hz to 1MHz
AC Test Voltage Programmable from 20mV to 1V
Internal DC Bias Voltage, Programmable from 0 to 2V
Fast Measurement Speeds up to 40/Second
Automatic Open/Short Zeroing Eliminates Connection Errors
LCD Display for Menu Programming and Test Results
14 Hi/Lo Sorting Bins for Pass/Fail Testing
USB, RS232, IEEE-488 and PLC Interfaces all Standard
Results Displayed as Deviation or %Deviation from a Nominal Value
Internal Storage and Recall of 30 Test Setups
Monitor Voltage and Current to the Device Under Test
Constant Voltage Maintained to the Device Under Test
Ability to Automatically Perform 6 Unique Tests in Sequence
Keypad Lockout Prevents Changes to the Test Setup
Programmable Average and Delay Times
Automatic Correction for Different Test Lead Lengths

For more information, see the manufacturer's site:
www.quadtech.com/iproducts/products.asp?familyid=28

1730T Precision LCR Meter

Why Buy?
Mid-range LCR meter with good accuracy and frequencies to 100kHz
To perform transformer turns ratio and DCR measurements
Need an excellent alternative to the Agilent Model 4263
Need fast measurement speeds (to 62 measurements/sec)
Need to monitor/display voltage and current to the device under test
Features:
Measures 14 Impedance Parameters (2 simultaneously)
0.1% Basic Measurement Accuracy
10 Test Frequencies from 50Hz to 100kHz
AC Test Voltage Programmable from 10mV to 1V
Fast Measurement Speeds up to 62/Second
Automatic Open/Short Zeroing Eliminates Connection Errors
LCD Display for Menu Programming and Test Results
Hi/Lo Comparator Limits and 8 Sorting Bins for Pass Fail Testing
IEEE-488 and PLC Interfaces Standard
Results Displayed as Deviation or %Deviation from a Nominal Value
Storage and Recall of 50 Test Setups
Monitor Voltage and Current to the Device Under Test
Keypad Lockout Prevents Changes to the Test Setup
Programmable Average and Delay Times
Capable of Applying a DC Bias Voltage or Current to the Device
Automatic Correction for Different Test Lead Lengths

For more information, see the manufacturer's site:
www.quadtech.com/iproducts/products.asp?familyid=68

View other products:
www.quadtech.com

Tinsley LCR Databridges

Automatic micro-processor controlled  LCR Impedance Bridges
with accuracies up to 0.1%. Providing resistance, capacitance 
and inductance measurement, these versatile instruments are ideal
for inspection,  production line testing and general laboratory use
on a wide variety of components.  Accessory probes provide the means
of checking surface mount components.
>> Model: 6401
0.25% nominal accuracy
100/120Hz - 1kHz
>> Model: 6451
0.1% nominal accuracy
100/120Hz,  1kHz,  10kHz
>> Model: 6458
0.1% nominal accuracy
100/120Hz,  1kHz,  10kHz
>> Model: 6471
0.1% nominal accuracy
100/120Hz,  1kHz,  10kHz, 100kHz
>> LCR  Databridge accessories
Test leads, Calibration  Standards,
Computer Interfaces, Software etc.

For more information, see the manufacturer's site:
www.tinsley.co.uk/products/lcr-databridges/index.html

LCR Databridge Model 6401

The model 6401Databridge component measurement instrument
is an economically  priced, automatic and microprocessor controlled LCR
bridge with a basic accuracy  of 0.25%. It's useful features and
realistic price make it ideally suitable in many applications.

> Measures Resistance, R, Inductance,  L, Capacitance, C,
and Quality, Q, automatically.  
> 0.25% of reading, ±1  digit basic accuracy. 
> Eight decades of LCR measurement. 
> 2 selectable measurement frequencies:  100/120* Hz or 1 kHz
(0.025% accuracy) 
> 4-digit LED display with automatic  decimal point.  
> User prompt facility for best accuracy. 
> Selectable series or parallel measure 
> Integral 4-terminal test fixture. 
> External bias voltage up to 50  V possible. 
> Input protection against charged  capacitors up to 10mF and 50V.  
> Model 6403 is equipped with an  interface for the limits comparator
model 6422.
Test limits can be defined  either of two ways. In the
first of these, the upper and lower acceptable  values are set in the two
banks of thumbwheel switches.
Alternatively  the PASS band can be determined using a nominal value
and upper and lower  percentage tolerance. Three indicators are
available to show where the  measured value lies with respect to
the upper and lower pass band limit.  The same information is also
available at 3 floating relay contacts of  the 6422 comparator.  
> Automatic indication for overrange  or underrange.  
> Easy operation by means of only  6 keys.  
> Automatic selection of measurement  range (lockable if many
components in the same range are to be measured)  and automatic
distinction between L and C.  
> Validity of measurement after 1  second maximum.  
> 2 measurements per second.  
> An adaptor for axial lead components  is provided with the unit.  
> Selectable internal 2 V bias voltage  for measurements of
electrolytic capacitors.  
> Detailed operation manual.

*120 Hz measurement frequency available  as factory-fitted option.

For more information, see the manufacturer's site:
www.tinsley.co.uk/products/lcr-databridges/6401.htm

View other products:
www.tinsley.co.uk