Attenuators
Aeroflex Weinschel Attenuators
>> Fixed Coaxial Attenuators (2-10 W)
>> High Power Fixed Attenuators (25-500 W)
>> Calibrated Attenuator Set
>> Coaxial Terminations
>> Continuously Variable Attenuator
>> Manual Step Attenuators
>> Relay Switched Programmable Attenuators
>> GaAs & Pin Switched Programmable Attenuators
>> SmartStep Programmable/Switch Controllers, 8210A
>> SmartStep Programmable Attenuator Units, 8310/8311
>> Power Splitters & Dividers
>> Coaxial Adapters
>> Planar Blind-Mate Connector Systems
>> Planar Crown® Connector Systems
>> Custom & Other Components
>> Subsystems & Accessories
>> Mechanical Phase Shifters
>> DC Blocks
Fixed Coaxial Attenuators (2-10 W)
For more information, see the manufacturer's site:
www.weinschel.com/prdfixed.htm#attenuators
Medium and High Power Fixed Attenuators (25-500 W)
For more information, see the manufacturer's site:
www.weinschel.com/prdhPFix.htm#high
Precision Calibrated Attenuator Sets
 | Aeroflex / Weinschel offers several
For more informations, |
Coaxial Terminations & Loads,
dc-40 GHz, 1-1,000 Watts
Aeroflex / Weinschel offers a full line of coaxial terminations and loads.
Our terminations and loads can be found in almost every phase of
microwave industry from simple directional coupler port termination to the
design measurement and wireless communications systems.
For more information, see the manufacturer's site:
www.weinschel.com/prdterm.htm
Continuously Variable Attenautors
 | Aeroflex / Weinscheloffers a wide selection of Variable Attenuators. These Variable Attenuators are great for those applications where the need exists for controlling signal levels continuously without interrupting the circuit. Aeroflex / Weinschel Variable Attenuators line features: |
> Continuously Variable Attenuation - Most models are in linear scales,
and low frequency sensitivity with broad frequency coverage, resulting
from the use of proven Weinschel resistive films.
> Direct Reading - Individually calibrated incremental insertion loss dials.
> Stability - The resistive elements located in these Variable Attenuators
provide long-term stability over temperature and humidity.
> Quality Connectors - Most Aeroflex / Weinschel Variable Attenuators
are supplied with stainless steel Type N or SMA connectors that mate
nondestructively with connectors per MIL-C-39012.
> Broadband - The Aeroflex / Weinschel Precision Continuously Variable
Attenuator line provides a selection of frequency ranges from dc to
4.2 GHz, continuous incremental attenuation ranges up to 127 dB, and
input handling capabilities to 5 watts.
> Custom Designs Available on Request - Just contact us with your
special requirement, such as different frequency ranges, connector
options, and special testing.
> High Repeatability.
For more information, see the manufacturer's site:
www.weinschel.com/PRDVMSTP.HTM
Manual Step Attenautors
 | Aeroflex / Weinschel offers a wide selection of Manual Step Attenuators. These step attenuators are ideal for those applications demanding broadband accuracy with low SWR and accurate repeatability over large attenuation ranges. The Aeroflex / Weinschel Step Attenuators utilize the excellent performance characteristics |
of the Aeroflex / Weinschel fixed coaxial attenuators. Aeroflex /
Weinschel Step Attenuators can be found in many types of ATE and OEM
systems located throughout the world.
Other features of Aeroflex / Weinschel Step Attenuators include:
> Long Life and High Repeatability.
> Choice of Standard Attenuation Ranges - Aeroflex / Weinschel offers
different attenuation ranges to select from. These range from 0 to 9 dB in
1 dB steps up to 0 to 110 dB in 10 dB steps.
> RF Designs (Model 3033) - These models featureca rugged cost
effective design for wireless, cellular, PCS and Modem Test Applications
as well operation from dc to 2.0 and attenuation ranges from 0 to 10 dB
in 1 dB steps, 0 to 11 in 1 dB steps.
> Stability - The resistive elements used in these Step Attenuators
provide long-term stability over temperature and humidity.
> Quality Connectors - Aeroflex / Weinschel Step Attenuators are
supplied with stainless steel Type N or SMA connectors that mate
non-destructively with connectors per MIL-C-39012.
> Broadband - The Aeroflex / Weinschel Precision Step Attenuator line
provides a wide selection of frequency ranges from dc to 40 GHz.
> Product Uniformity - High volume fabrication techniques, including
injection molding, stamping, broaching and thick film printing ensure a
cost effective and uniform product.
> Custom Designs Available on Request - Just contact us with your
special requirement, such as different frequency ranges, connector
options, and special testing.
For more information, see the manufacturer's site:
www.weinschel.com/PRDMMSTP.HTM
Relay Switched Programmable Attenuators
Aeroflex / Weinschel offers a wide selection of Programmable
Attenuators that operate over the dc-26.5 GHz frequency range.
Aeroflex / Weinschel Programmable Attenuators are ideal for those
applications demanding broadband accuracy with low SWR and accurate
repeatability over large attenuation ranges. These Programmable
Attenuators utilize the excellent performance characteristics of the
Aeroflex / Weinschel Fixed Coaxial Attenuators. Weinschel
Programmable Attenuators can be found in many types of ATE and OEM
systems located throughout the world.
 | Power Splitters & Dividers
Aeroflex / Weinschel offers a wide
|
> Miniature Size and Light Weight.
> NEW 4-Way Resistive Power Dividers (Model 1550A & 1594) -
This NEW rugged cost effective design is ideal for Wireless, Cellular,
PCS, and other RF applications. These units offer SMA3.5mm
connectors, Low SWR, and dc to 2 (1550A) or dc-18 (1594) GHz
operation with excellent amplitude and phase tracking.
> Accurate Division - The balance of power division on the two output
arms is 0.25 dB or lower between dc and 18 GHz.
> Stable - Low temperature and power coefficients ensure operating
stability.
> Quality Connectors - Aeroflex / Weinschel SMA, Type N, TNC, and
2.92mm connectors are superior connectors which mate nondestructively
with connectors per MIL-C-39012. Precision GPC-7 connectors
per IEEE-STD-287.
> Stability - Low temperature and power coefficients.
Aeroflex / Weinschel's film resistor products are artificially aged for high
stability under normal as well as extreme operating conditions.
> Broadband Frequency Range - Aeroflex / Weinschel Power Splitters
and Dividers offer a wide selection of frequency ranges from
dc to 40 GHz.
> Custom Designs Available on Request - Just contact us with your
special requirement, such as:
> Broadband High Power
> Low SWRReturn Loss
> Unique Packaging
For more information, see the manufacturer's site:
www.weinschel.com/prdpsad.htm
Coaxial Adapters
 | Aeroflex / Weinschel offers a wide variety of precision SMA, 2.92mm, Type N, GPC-7, 3.5mm, 2.4mm and male, female, and sexless combinations of adapters to choose from. Also Weinschel Corporation manufactures precision Type N, Planar Blind Mate Connectors and the PLANAR CROWN® UNIVERSAL CONNECTOR SYSTEM. All Weinschel Corporation components are designed and manufactured in-house to obtain low SWR and excellent repeatability |
over the longest possible operational life. Weinschel Corporation's full
line of adapters can be found in numerous OEM, test, R&D, and field
applications throughout the world. Other features of Weinschel
Corporation Adapters and Connectors include:
> High Repeatability.
> Quality Connectors - Aeroflex / Weinschel SMA, Type N, and 2.92mm
connectors are superior connectors which mate nondestructively with
connectors per MIL-C-39012.
> Bulkhead Mounting Available - These models conveniently mount on
any panel using a D-hole shown below. Extra heavy construction for long
life even with mistreatment makes this adapter suitable for front
panel use.
> Broad Frequency Range - Aeroflex / Weinschel Adapters offer a wide
selection of frequency ranges from dc to 26.5 GHz.
> Custom Designs - Just contact us with your special requirement, such
as: High Frequency; Low SWRReturn Loss; Unique Packaging; and
Specialized Connectors.
> Express Overnight Shipment - Most Aeroflex / Weinschel Adapters
are available off-the-shelf via Sickles Distribution Sales.
For more information, see the manufacturer's site:
www.weinschel.com/prdadpt.htm
View other products:
www.weinschel.com
Planar Blind-MATE®
Connectors
Planar Blind-mate® Connectors are
typically used as a pair or set which
iscomprised of two connector
subassemblies that have a common
mating interface. Generally, a pair
conatins one floting blind-mate
Interface with spring loaded inner /
outer contacts and the other is a
fixed blind-mate interface with fixed
inner/outer contacts.
The Planar Blind-mate series
provides threadless connector
mating which is useful when mating
an array of connectors on one RF
module toanother array within
seconds. Each connector pair will
tolerate typically 0.02 per pair radial
and axial offset misalignment and
still meet all of its electrical
specifications.
Most Weinschel Planar Blind-mates
designs conveniently mount on any
panel using a standard panel D-hole
or most any standardized hole
pattern. Extra heavy construction for
long life even with mistreatment
makes these blind-mate products
suitable for panel use.
U.S. and Foreign Patents pending
For more information,
see the manufacturer's site:
www.weinschel.com/PRDBMC.htm
Planar Crown®
Universal
Connector System
The Aeroflex / Weinschel PLANAR
CROWN® Universal Connector
System incorporates design and
application features that eliminate
the mechanical, electrical and
economical drawbacks of standard
bulkhead connectors, connector
savers, cable connectors and
adapters.
This connector system is comprised
of two connector halves /
subassemblies which have a
common mating interface referred to
as the PLANAR INTERFACE. The
first connector half is called the
PLANAR BULKHEAD which readily
mounts into instrument front panels,
components and cables. One end of
this bulkhead has a 2.92mm male /
female primary connector. The other
end has a combination of grooves,
external threads and a coaxial
PLANAR INTERFACE with a
2.92mm airline geometry.
For more information,
see the manufacturer's site:
www.weinschel.com/prdpcs.htm
Custom Products &
Servicer
Aeroflex / Weinschel Services In
addition to providing a broad range
of standard catalog products to our
customers. Aeroflex / Weinschel
offers a variety of other in-house
services to its customers, including:
www.weinschel.com/prdcusto.htm
Smartstep SUBSYSTEMS
Streamline System Design
& Device Integration!
Aeroflex / Weinschel's new
SmartStep technology streamlines
system designs and device
integration by providing a flexible
bus interface as well as components
that are simple to configure and
control. Creating Subsystems using
Aeroflex / Weinschel’s Smartstep
approach streamlines the design and
layout of application specific
subsystems that include a wide
range of microwave and RF
components such as programmable /
fixed attenuators, power combiners /
dividers/splitters, directional
couplers, amplifiers, filters, noise
sources and switches which can be
controlled using various standard
communications interfaces including
IEEE-488, RS232, RS422, Ethernet
(SNMP option) and RS485.
Subsystem design options can also
include:
> Turnkey subsystems built to
customer specified design & layout.
> Wide dynamic and frequency
ranges.
> Front panel and menu controls.
> 50 or 75 ohm configurations.
> Attenuation/switching schemes.
> Customer specified Input / Output
parameters.
> Individual to complex matrix /
channel configurations.
> Specialized testing and calibration
For more information,
see the manufacturer's site:
www.weinschel.com/
subsystems.htm
Mechanical Phase Shifters
> DC to 20 GHz; Low Loss; Linear
> EDGE LINE designs for ultra fine
resolution to 22 GHz
> COAXIAL designs for broadband
low-loss operation to 20 GHz
> STRIPLINE designs for lower cost
applications to 12 GHz
> Slide Adjustment Model 981:
> operates from dc to 18, usable to
20 GHz
> Ideally suited for delay line
applications in optical and RF
Networks.
> Easily adapts to motorized control
configurations.
> Designed for long mechanical
cycle life.
> Self Locking - Models 917 and
980 contain Internal mechanism
eliminates the need for a locking nut.
> Ideal for phase trimming in
densely packaged systems with
minimum accessibility.
> All Models provides a linear
adjustable phase shift in a very
small in-line coaxial packages.
For more information,
see the manufacturer's site:
www.weinschel.com/
PRDPhase Shifter.htm
DC Blocks
Aeroflex / Weinschel dc Blocks
contain capacitance in-series with
the center conductor to prevent the
flow of dc current, while permitting
RF power to flow without
interruption.
> New Inside/Outside Models-7012
> Multi-Octave Bandwidth
> Low SWR - Maximum SWR
remains low through full frequency
and power range.
> Rugged Construction - Aeroflex /
Weinschel semi-precision Type N
and SMA stainless steel connectors.
Molded captive inner contact/bead
assembly provides controlled and
stable interface dimensions.
For more information,
see the manufacturer's site:
www.weinschel.com/
prddcblocks.htm
View other products:
www.weinschel.com
| Web page created by: netpeople.hu |  |
|