PRT - Thermometers

Measurements International
Temperature Meters

Measurements International is a manufacturer of a series of very low
temperature coefficient, precision, stable resistors to provide stability and
traceability for your temperature calibrations. MI has also become the
world’s leader in the supply of DC Comparator Technology Bridges for
Resistance Thermometry applications.

>> 210A Automated Four Terminal Matrix Scanner - 10 Channel
>> 4220A Automated Low Thermal Matrix Scanner 20 Channel
>> 6010T Automated Thermometry Bridge
>> 6015T Automated Primary Thermometry Bridge

>> 6242T Automated Secondary Thermometry Bridge
>> 9210A MI - Type One Ohm Standard
>> 9301JW Standard Resistor Oil Bath - 95 Liter w/Interface
>> 9302JW Standard Resistor Oil Bath - 157Liter w/Interface

>> 9331 Standard Air Resistor - 4 Terminal (1 to 1G Ohm)
>> SPSCW XX YY 4 Teflon Cable Cut To Length & Finished -
 4 Conductor
>> SPSCW 100 - 4 100 Meter Roll of Teflon Cable - 4 Conductor
>> Marcol 72 Laboratory Grade Resistor Bath Mineral Oil

>> 4304T Temperature Controlled 4 Element Resistance Standard
>> 4310T Temperature Stabilized Resistance Standard

For more information, see the manufacturer's site:
www.mintl.com/leftProducts_Temperature.htm

Model 6010T
Automated Thermometry Bridge 

> DCC Technology > Current Reversal > Front and Rear Panel Inputs > Accuracy: <0.05 PPM > Noise: <2nV > IEEE488 and Manual Operation   Additional information, see: www.mintl.com/documents/6010t.pdf

Model 6015T
Automated Primary Thermometry Bridge 

> DCC Technology > Current Reversal > Front and Rear Panel Inputs > Accuracy: <0.02 PPM > Noise: <2nV > IEEE488 and Manual Operation

Additional information, see:
www.mintl.com/documents/6015t.pdf

Model 6242T
Automated Secondary Temperature Bridge 

> 0.1 to 10,000 Ohm Range > Accuracy: 0.2 PPM (0.05m°C) > Maximum Ratio: 14:1 > DC Current > Comparator Technology > Resolution: 0.01 PPM > Linearity: 0.01 PPM

Additional information, see:
www.mintl.com/documents/6242t_ds-rev1.pdf

View other products:
www.mintl.com

Tegam Temperature Meters

Humidity and Temperature Transmitters
Humitran-RHT Series - Humidity and Temperature
Transmitters

Description: TEGAM's solution for monitoring relative humidity and temperature, the RHT series provides a linearized output current from 4-20 mA(model RHT-20C) or a linearized output voltage from 0-1VDC (model RHT-10V) representing temperature and humidity. Humidity

readings are temperature compensated and the RHT transmitters only
require an unregulated DC supply voltage of 6-30VDC.
Model  RHT-20C produces 4-20 mA current signals representative of
temperature and humidity and is ideal for transmitting readings over long
distances of cable. Model RHT-10V produces a linear voltage from 0 to
1 volt representative of temperature and humidity. Because voltage is
used instead of a current loop, less power is consumed which makes this
model ideal for battery powered applications.

Humitran-RH Series - Relative Humidity Transmitters

Description: TEGAM's RH series transmitters are an economical solution for the continuous monitoring of relative humidity. The unit uses a special thin film type capacitor protected by a removable stainless- steel mesh screen located on the outside of the enclosure. Tegam's

Humitran-RH transmitters are built with an air tight ABS enclosure that is
easy to mount onto a wall or other flat surface. Requires a 6-30VDC,
(24VDC nominal) power supply. Each model has a single, two-wire output
for either a 4-20mA or 0-1V signal. Model RH-20C outputs a 4-20 mA
current loop for long virtually unlimited cable distances.
Model RH-10V outputs a 0-1V voltage representative of the humidity for
low power or battery powered applications.

Humitran-DP Series - RH & Temperature Duct Probe
Transmitters

Description: TEGAM's Humitran duct probes provide a reliable, accurate, and low cost method for monitoring relative humidity plus temperature. Solid state sensors supply excellent sensitivity, fast response and long term stability. Simple hook up and linearized output

permit interfacing with most display or control devices.
Model RDP-20C outputs a 4-20 mA current loop for long virtually
unlimited cable distances. Model RDP-10V outputs a 0-1V voltage
indicating humidity for low power or battery powered applications.

Humitran-T Series - High Temperature RH &
Temperature Probe Transmitters

Description: TEGAM's high temperature solution for RH and temperature monitoring under high temperature conditions. The Humitran-T Series transmitters measure humidity levels from 3% to 95% RH and temperatures from -40°F-356°F (-40°C-180°C). Probes

are constructed with stainless steel and Teflon cable.
 Model HTRH-W is a 2.5" long X .625" diameter probe supplied with a wall
mounting bracket. Model HTRH-D is an 8.5" long X .624" diameter probe
supplied with an adjustable, removable flange for duct mounting.

For more information, see the manufacturer's site:
www.tegam.com/html/humidity_transmitters.htm

Humidity and Temperature Controllers
Humitran-C Series - RH and Temperature Controller
& Probe Sets

Description: TEGAM's Humitran-C Series offers a total temperature and humidity monitoring solution for virtually any application. Each temperature/ humidity controller includes an RH & temperature duct probe, which can be placed up to thousands of feet from the controller. The C series controllers have dual set points with recorder and relay outputs for interfacing to air temperature & humidity devices.

Humitran-Model RHS-1 Humidity Controller
& Probe Sets 

Description: Model  RHS-1 Relative Humidity Set point controllers are simple to install and offer dependable performance for monitoring relative humidity. Each set includes a dial-type set point controller and a stainless steel humidity probe. The probe may be mounted up to several thousand feet from the controller. The controller includes a recorder output of 0-1 V or 0-5V for a 0-100% RH input, independent bandwidth control, 230VAC @ 5A relay outputs for external devices.

For more information, see the manufacturer's site:
www.tegam.com/html/humidity_controllers.htm

Thermocouple Thermometers
Model 819 Single Input, Type K J T,
Thermocouple Thermometer 

Description: The Model 819 digital thermometer is compatible with type K, J, or T thermocouple probes to provide a wide range of temperature measurements, (-346°F to 2502°F). The heavy-duty case is specifically designed for durability and resistance to contaminants such as dust and chemicals. It also features a tilt bail for hands-free or bench top operation. An optional protective rubber boot & belt clip, PN#8204, is available to protect the meter against drops and other physical stresses. Optional accessory kits are also available.

Model 820 Dual Input, Type K J,
Thermocouple Thermometer 

Description: Model  820 series, dual input, digital, thermometers are compatible with type K or J thermocouple probes to provide temperature measurements from -346°F to 2502°F. The heavy-duty case is designed for durability and resistance to external contaminants such as dust and chemicals. The case has a built-in tilt bail for hands-free or bench top operation. An optional protective rubber boot & belt clip, PN#8204, is available to protect the meter against drops and other physical stresses. Optional accessory kits are also available.

Model 821 Dual Input, Type K J T,
Thermocouple Thermometer

DESCRIPTION:  This dual input thermometer is functionally the same as
the Model  820 except that type T thermocouple compatibility is added to
expand the meters compatibility to the most common thermocouple types.
Option #8204, protective rubber boot & belt clip, and other accessories
compatible with Models 819 and 820, are also available for this device.

Models 874F / 874C General Purpose Digital
Thermometers 

Description: Tegam's  874F and 874C Budget Series thermometers provide the economical solution for general-purpose temperature measurement needs. The units accept type K thermocouples and probes. Constructed with ABS material for resistance to inorganic salts, alkalies, and many acids and exceptional durability, this meter is designed for the toolbox and for use in the field. Optional 8660 tilt stand/belt clip, 8668 vinyl case or 1104 leather case are available. Model 874C measures from -85°C to 1100 to °C and Model 874F measures from -120°F to 1999°F.

Models 871A / 872A Thermocouple Thermometer with
Analog Output

Description: Industry's leading handheld thermometers that feature analog outputs for use with chart recorders or computer I/O cards, the 870 series has dual thermocouple inputs and respective linear analog outputs which produce 1mV/°C or 5/9 mV/°F in the 200° ranges and 1mV/°C or 5/90 mV/°F in the other ranges. The Model 871A uses Type K thermocouples to measure a temperature range from -40 to 1999°F

(-40 to 1370°C) and the Model 872A uses type J thermocouples to
measure from -40 to 1400°F (-40 to 760°C). An optional, vinyl carrying
case, PN8668, is available for these models. 3-ft beaded wire
thermocouple probes are supplied with each unit.

For more information, see the manufacturer's site:
www.tegam.com/html/thermocouple_thermometers.htm

Thermistor Thermometers
Model 865 / 866 Thermistor Thermometers

Description: Tegam's Model 865 & 866 digital, thermistor thermometers measure temperatures from -70°F to 300°F, (-55°C to 150°C). Compatible with all YSI Series 400 probes, temperature measurement is performed with a basic accuracy of .3%. These thermometers are specially constructed with a heavy duty ABS case specifically designed for durability and resistance to contaminants such

as dust and most chemicals. Model  865 reads in °F and Model 866 reads
in °C. An optional tilt stand/belt clip, PN8660, is available for field
or bench top use.

Models 868 / 869 RTD Thermometers

Description: Models  868 and 869 digital RTD thermometers
measure temperatures from -360°F to 1100°F, (-220°C to 630°C).
Compatible with either 3 or 4 wire RTDs, temperature measurement is
performed with a best accuracy of .4°F(.3°C). These thermometers are
specially constructed with a heavy duty ABS case specifically designed
for industrial use. Model  868 reads in °F and Model 869 reads in °C. An
optional tilt stand/belt clip, PN8660, is available for field or bench top use.

For more information, see the manufacturer's site:
www.tegam.com/html/rtd_thermistor_thermometers.htm

Thermistor Probes

Model 8662 Thermistor Sensor Probe 

Description: Ideal for biological and geophysical testing of gases, liquids and subsoils. This rugged 5-ft long wire probe is constructed with stranded 22AWG Teflon-insulated wire connected to a YSI series 400, 1/4" phone jack. The probe tip is protected with a 304 stainless steel casing.

Model 8663 General Purpose /
Immersion Thermistor Probe

Description: Designed for immersion into liquids or gases, the 8663
probe is constructed with a 3-3/4", round tipped, 316 stainless sheath,
and a 2" handle connected to a thermoplastic rubber coil type cord.
The cord extends from 1-1/2 feet to 3 feet.

Model 8665 Surface Thermistor Probe 

Description: For fast temperature measurements on flat surfaces such as grills or ovens. Designed with a 3-3/4", 304 stainless steel sheath terminating into a 1/4" flat beveled tip for easy tip placement onto the surface being monitored. The flexible thermoplastic rubber cord extends from 1-1/2 feet to 3 feet.

Model 8666 Air / Gas Thermistor Probe

Description: The specially designed, shielded tip of this probes
makes it ideal for monitoring moving air or gas temperatures.
The exposed sensing element, located on the tip of a 3-3/4" long, 1/4"
diameter, sheath, is protected by a perforated shield to minimize
fluctuating readings caused by radiation or isolated gas pockets.
The cord is an extendable / retractable coil-type which is 1-1/2 feet long
and can extend up to 3 feet maximum.

Model 82814 Penetration Thermistor Probe

Description: Constructed with a pointed 316 stainless steel tip for
insertion into semi-soft materials such as meats and cheeses. The extra
heavy duty cord expands and retracts from 1-1/2 to 5 feet, thousands of
times without breaking. The 3-3/4" sheath is constructed with 304
stainless steel with a 316 SS tip.

For more information, see the manufacturer's site:
www.tegam.com/html/thermistor_probes.htm

View other products:
www.tegam.com